DeWalt DCE089G, Руководство пользователя

Страница: 8 / 126

8
GB
• Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may
result.
• Do not remove or deface warning labels. If labels
are removed user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. Damage
to the laser or serious injury could result if the laser falls.
Laser Information
The DCE089G, DCE089R 3-Beam 360° Line Laser and the
DCE0811G, DCE0811R 2-Beam 360° Line Laser are Class 2
laser products. The lasers are self-leveling laser tools that can
be used for horizontal (level) and vertical (plumb) alignment
projects.
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
Work Area
• Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
• Do not operate laser tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a laser
tool. Distractions can cause you to lose control.
Electrical Safety
Use battery operated tool only with the specifically
designed batteries. Use of any other batteries may create
a risk of fire.
Product Overview
WARNING:
Never modify the tool or any part of it. Damage to the
laser or personal injury could result.
Figure 2 -
Battery Interface
A
Figure 1A -
Pendulum Lock
B
Figure 1B -
Keypad
C
Figure 1B -
ON/OFF button: horizontal laser line
D
Figure 1B -
ON/OFF button: side laser line
E
Figure 1B -
ON/OFF button: front vertical laser line
(DCE089R/G only)
F
Figure 2 -
Magnetic pivot bracket
G
Figure 4 -
Tripod thread fitting (1/4 - 20 & 5/8 -11)
I
Figure 1B -
Battery level indicator
J
Figure 5 -
Ceiling Mount Clamp
K
Figure 5 -
Ceiling Mount
L
Figure 5 -
Screw Hole
M
Batteries and Power
This tool is powered by the following DeWALT 10.8V Battery
packs: DCB120, DCB127 or may also be powered using the
DEWALT AA Starter pack which can carry four AA batteries.
Note: The AA starter pack is recommended only for use with
the red laser.
Battery Installation and Removal
Using the AA Starter Pack:
CAUTION:
The AA starter pack is designed specifically for
use only with the DeWALT 10.8V compatible laser
products and cannot be used with any other tools Do
not attempt to modify the product.