background image

4

English

EC-Declaration of Conformity

Machinery Directive

Drill/Driver/Hammerdrill 
DCD991, DCD996

D

e

WALT

 declares that these products described under 

Technical Data

 are in compliance with:  

2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010, 
EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and 
2011/65/EU. For more information, please contact 

D

e

WALT

 at 

the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical 
file and makes this declaration on behalf of 

D

e

WALT

.

Markus Rompel 
Director Engineering 

D

e

WALT

, Richard-Klinger-Straße 11, 

D-65510, Idstein, Germany 
23.05.2017

WARNING:

 To reduce the risk of injury, read the 

instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each 
signal word. Please read the manual and pay attention to 
these symbols.

 

DANGER: 

Indicates an imminently hazardous 

situation which, if not avoided, 

will

 result in 

death or 

serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation 

which, if not avoided, 

could

 result in 

death or 

serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or 

moderate injury

.

NOTICE: 

Indicates a practice 

not related to 

personal injury

 which, if not avoided, 

may

 result in 

property damage

.

 

Denotes risk of electric shock.

 

Denotes risk of fire.

General Power Tool Safety Warnings

 

WARNING: Read all safety warnings and all 
instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS  

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

1) Work area safety

a ) 

Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

b ) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 

Power tools create sparks which 

may ignite the dust or fumes.

c ) 

Keep children and bystanders away while operating 
a power tool. 

Distractions can cause you to lose control.

2) Electrical safety

a ) 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of 
electric shock.

b ) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric shock if 

your body is earthed or grounded.

c ) 

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 
electric shock.

d ) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. Keep 

Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight

Batteries

Chargers/Charge Times (Minutes)

Cat #

V

DC

Ah

Weight (kg) DCB107

DCB113

DCB115

DCB118

DCB132

DCB119

DCB546

18/54

6.0/2.0

1.05

270

140

90

60

90

X

DCB547

18/54

9.0/3.0

1.25

420

220

140

85

140

X

DCB181

18

1.5

0.35

70

35

22

22

22

45

DCB182

18

4.0

0.61

185

100

60

60

60

120

DCB183/B

18

2.0

0.40

90

50

30

30

30

60

DCB184/B

18

5.0

0.62

240

120

75

75

75

150

DCB185

18

1.3

0.35

60

30

22

22

22

X

DCB187

18

3.0

0.48

140

70

45

45

45

90

Содержание DCD996P2

















Отзывы: