8
INTENDED USE
These heavy-duty impact wrench/drivers are designed for professional impact
screwdriving applications. The impact function makes this tool particularly useful for
driving fasteners in wood, metal and concrete.
DO NOT
use under wet conditions or in
presence of flammable liquids or gases.
These heavy-duty impact wrench/drivers are professional power tools.
DO NOT
let
children come into contact with the tool. Supervision is required when inexperienced
operators use this tool.
OPERATION
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories.
Installing and Removing the
FIG. 2
H
Battery Pack (Fig. 2)
NOTE:
Make sure your battery pack is
fully charged.
To install the battery pack into the tool
handle
, align the base of the tool with
the notch inside the tool’s handle
(Fig. 2) and slide the battery pack firmly
into the handle until you hear the lock
snap into place.
To remove the battery pack from the
tool
, press the release buttons (H) and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger section of this manual.
Switch
DW059-XE (FIG. 3)
Pressing the BOTTOM part of the rocker switch (B) runs the tool in forward (right
hand thread) direction. Pressing the TOP of the switch reverses motor direction. This
allows “rocking” fasteners to break them loose.
Foreign materials of a conductive nature such as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the power supply when there is
no battery pack in the cavity. Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING:
Shock hazard. Don’t allow any liquid to get inside charger. Electric
shock may result.
CAUTION:
Never attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, return to a service center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct sunlight and
excess heat or cold.
2. Long storage will not harm the battery pack or charger. Under proper conditions,
they can be stored for 5 years or more.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Motor
Voltage decrease of more than 10% will cause loss of power and overheating. All
D
E
WALT tools are factory tested; if this tool does not operate, check your battery
pack.
COMPONENTS
WARNING:
Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
F. Detent pin
B. Rocker switch (DW059-XE)
G. Anvil
C. Forward/reverse button
H. Battery release buttons
D. Sleeve
I. Worklight
E. 6.35 mm (1/4") hex
quick-release chuck
