DeWalt D28730 GB/XE, Руководство пользователя

Страница: 5 / 12

English
3
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
D28730
GB/XE/LX
Voltage V
AC
230/115
UK & Ireland V
AC
115
Type 1
Power Input W 2300
No-load speed min -1 4000
Min. peripheral speed cutting disc m/s 80
Disc diameter mm 355
Disc bore mm 25.4
Disc body thickness mm 3.0
Thread size of spindle M10
Type of cutting disc straight, non-recessed
Cross-cutting capacity at 90˚
circular mm 125
square mm 115 x 115
rectangular mm 115 x 130
angular mm 120 x 120
Cross-cutting capacity at 45˚
circular mm 115
square mm 98 x 98
rectangular mm 95 x 105
angular mm 105 x 105
Weight kg 15.5
Noise values and/or vibration values (triax vector sum) according to
EN62841-3-10:
L
PA
(emission sound pressure level) dB(A) 96.7
L
WA
(sound power level) dB(A) 107.1
K (uncertainty for the given sound level) dB(A) 3
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Chop Saw
D28730
D
e
WALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-3-10:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT .
Markus Rompel
Vice-President Engineering, PTE-Europa
D
e
WALT , Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
17.08.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury
.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
English (original instructions)
CHOP SAW
D28730