Devolo Magic 2 WiFi next, Руководство пользователя

Страница: 78 / 445

19 Introduction
devolo Magic 2 WiFi next
Connecting Wi-Fi devices via WPS
b
If the device is still on factory defaults , tap the
Wi-Fi button in order to activate WPS .
b
If the Wi-Fi connection was switched off and
you would like to activate WPS , press the Wi-
Fi button twice ; once to switch Wi-Fi on, and
again to activate WPS.
b
If the Wi-Fi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter
4.7.5 Config Sync
.
WPS is one of the encryption standards de-
veloped by the Wi-Fi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter
4.4.7 Wi-Fi Pro-
tected Setup (WPS)
.
2.3.3 Reading the Wi-Fi indicator light
The integrated Wi-Fi indicator light ( LED ) shows
the status of the devolo Magic 2 WiFi by illumina-
ting and/or flashing
Wi-Fi-LED Flashing behavior Meaning LED status display
(web interface*)
1 White LED Flashes at intervals
of
0,1 sec. on /
5 sec. off
The devolo Magic adapter is in
WPS mode to integrate Wi-Fi-
enabled devices via WPS. Cannot be disabled
2 White LED Lights up steady Wi-Fi is switched on and active. Can be disabled