Devolo Home Control Humidity Sensor, Первые шаги

Страница: 9 / 12

9
If you use screws to attach the Home Control Humidity Sensor , take apart the upper and lower
housing component of the sensor by pressing the tab down in order to release the housing compo-
nents (from top to bottom, and ).
쑗
Based on the drill template on the lower housing component, drill holes into the desired location
and attach the lower component of the sensor using screws.
쑗
Insert the bottom end of the upper housing component into the groove provided for this purpose
in the lower component.
쑗
Then push the entire upper housing component (from bottom to top, and ) onto the lower
component as far as it will go. This completes the installation of the Home Control Humidity Sensor.