Devolo dLAN TV Sat, Руководство пользователя

Страница: 22 / 72

Initial use
|
|
devolo dLAN TV Sat
|
22
useful hints intended to allow you to identify and remedy the problem. If you
need additional support, the "Preface" chapter at the beginning of this manual
tells you how to contact our support department.
The Power LED on the power supply is not illuminated.
햲
Check the connection of the power supply and the power outlet.
햳
Ensure that the power supply fits tightly in the outlet and that the outlet is
supplied with power.
햴
Try using a different power outlet.
The Power LED on the tuner is not illuminated.
햲
Check the connection of the tuner and the power supply.
햳
Check to ensure that the Power LED of the power supply is illuminated.
The yellow LED for the LAN connection (tuner) is not illuminated.
햲
For connection via dLAN: Check whether the Ethernet cable of the power
supply is plugged tightly into the tuner of the dLAN TV Sat.
햳
For connection to a switch or dLAN adapter: Check whether you are using a
directly connected Ethernet cable.
햴
For direct connection to a computer: Check whether you are using an Ether-
net crossover cable.
The green LED for the LAN connection (tuner) and the Ethernet LED
on the power supply are not illuminated.
햲
The LEDs flash only when data are being sent to or from the dLAN TV Sat.
햳
Check whether the dLAN TV Sat is reachable via the network.
햴
For a network via dLAN: Ensure that both the dLAN TV Sat and the dLAN
adapter connected to it are using the same dLAN password.
The dLAN LED (power supply) is not illuminated.
햲
No dLAN connection exists.
햳
If the Power LED is also illuminated in orange: The power supply is in
Standby mode, for example because the tuner is not connected.