Devolo dLAN TV Sat, Руководство пользователя

Страница: 16 / 72

Initial use
|
|
devolo dLAN TV Sat
|
16
On the power supply
The power supply of the dLAN TV Sat has three cables and a button:
쎲
Connect the power supply to the power outlet using the power cable (230V
European plug) .
쎲
Connect the power supply to the power jack of the tuner outlet using the
power cable (12V DC connector) .
쎲
Using the Ethernet cable (RJ45) , connect the power supply to the LAN jack
of the tuner.
쎲
Using the encryption button next to the power cable, you can secure the
transmission of data via the dLAN at the touch of a button.
Note that the power supply of the dLAN TV Sat switches to Standby more after
approx. 20 minutes if the network cable is not connected to the tuner. In
Standby mode, the power supply cannot be accessed via the power grid. As soon
as the tuner is connected to the network and power cables, the power supply is
once again accessible via the power grid.
3.3 Connecting the adapter
Follow the sequence below in order to connect the dLAN TV Sat to the LAN, the
satellite antenna and the power grid.
Tip: First, check whether you can receive stations with the current alignment of
the satellite antenna, for example by connecting a receiver with a television for
test purposes. Then, check whether a connection is possible from your computer
to the dLAN TV Sat, for example by first installing the devolo software on the
computer, creating the local network on the computer and then checking
whether the Connect light is illuminated on the dLAN TV Sat when you start
CyberLink TV Enhance.
3.3.1 Connection to the network
Multiple options exist for connecting the dLAN TV Sat to a computer using the
LAN interface:
Connection via the dLAN
The installation location of the satellite antenna (and thus of the dLAN TV Sat)
usually has neither coaxial nor Ethernet wiring. However, there is usually a
nearby power outlet. Therefore, connecting the dLAN TV Sat and the computers
in your home via dLAN is a convenient option.