Devolo dLAN pro 500 Wireless+, Руководство пользователя

Страница: 40 / 83

Network configuration 39
devolo dLAN pro 500 W
WLAN configuration off
If you would like, you can completely shut off the Wi-Fi
part of your dLAN pro 500 W, e.g. if you want
to operate it exclusively as a simple dLAN device via the
built-in Ethernet connections. To do so, under
WLAN
configuration select the Off mode and confirm your
entry with Save WLAN mode or simply press the Wi-
Fi ON/OFF
button on the housing. The operating state
of the device is displayed under 4.3 Status over-
view .
Keep in mind that after saving this
setting, you will be disconnected
from any existing wireless connec-
tion to the
dLAN pro 500 W. In this
case, configure the device via
Ethernet or dLAN.
WLAN configuration as access point
If you would like the dLAN pro 500 W to act as
an access point, select
Access point mode under
WLAN configuration and confirm your entry with
Save WLAN mode or simply press the Wi-Fi ON/OFF
button on the housing. The dLAN pro 500 W
automatically changes to Access point mode. The op-
erating state of the device is displayed under
4.3 Sta-
tus overview .
WLAN configuration as client
If you would like the dLAN pro 500 W to act as
client, select
WLAN client mode under WLAN con-
figuration
and confirm your entry with
Save WLAN
mode . The operating state of the device is displayed
under
4.3 Status overview
.
If you select
WLAN client
mode,
WiFi
Move Technology
is automatically
disabled (also see
4.5.5 WiFi Move
Technology
).
4.5.1 Basic settings
In the WLAN settings , you can set the frequency
band, time control, radius server and the parental set-
tings, regardless of whether the
dLAN pro 500 W is set as an
Access point or
WLAN client . The settings apply to both modes .
For Wi-Fi operation of the dLAN pro 500 W, a
(transmission) channel must be specified in a particular
frequency range: