Devolo dlan pro 1200+ wifi ac, Руководство пользователя

Страница: 66 / 81

Network configuration 65
devolo dLAN pro 1200+ WiFi ac
Wi-Fi
In the example of building networking (see 2.5.2
dLAN pro 1200+ WiFi ac as a Wi-Fi client ), you
can also implement a VLAN trunk using Client mode.
쎲
Tx Force Untag disabled = Rx Tagged Only
automatically active
쎲
If multiple VLANs are selected, Rx Tagged Only
is activated automatically. The PVID is adjusted
automatically.
쎲
If only one VLAN is selected, PVID takes the value
of the corresponding VLANs; if both are active,
there is no more PVID.
Under PVID , the Port VLAN ID is specified, which is
assigned to received " untagged" frames. In the Rx
setting, Tagged only is the configured PVID without
meaning.
Under Default Priority , the VLAN priority is speci-
fied, which is assigned to the received untagged
frames.
4.6.4 VLAN and multi-SSID
Using the functions VLAN and multi-SSID, the
dLAN pro 1200+ WiFi ac can establish more complex
network architectures. The following illustration shows
a network of four devices, three access points (SSIDs)
and four VLANs. The VLAN trunk is implemented via
dLAN. VLAN 1 remains the Management VLAN. To
eliminate unwanted access on the intranet and the
back-end, Ethernet ports in VLAN 2 are configured.
When a client connects to dLAN pro 1200+ WiFi ac via
Ethernet, it only has access to the Internet. Thus, the
configuration of the dLAN pro 1200+ WiFi ac is also
excluded via Ethernet. VLAN 2 (Internet), VLAN 3 (in-
tranet) and VLAN 4 (back-end) are made accessible to
clients via Wi-Fi.