Devolo dLAN Highspeed Ethernet, Руководство пользователя

Страница: 11 / 25

|
devolo dLAN software
11
|
devolo dLAN Highspeed Ethernet
|
3.2 Installing the devolo dLAN software
햲
Put the enclosed devolo product CD in your CD-ROM drive.
햳
From the CD setup, select 'Install dLAN software'. Windows starts the wiz-
ard. Confirm by clicking
Next .
햴
Select 'Standard Installation' to install the complete devolo dLAN software
package. Then, click
Next .
If you would like to choose the software components to be installed yourself,
select 'Custom Installation'. Then, click
Next
.
햵
Terminate the installation by clicking Finish .
햶
After the installation has been completed successfully, start the devolo tools
by clicking
Start Programs devolo dLAN configuration wiz-
ard , EasyShare , Informer or EasyClean .
3.3 Configuration of the dLAN network using the
dLAN configuration wizard
Please have the previously noted dLAN adapters security IDs ready. The dLAN
configuration wizard requires them for configuration of the network. You will
find the security ID on the bottom of the device.
햲
Start the dLAN configuration wizard under Start Programs devolo
dLAN configuration wizard .
햳
Confirm with Next . The dLAN configuration wizard starts the network anal-
ysis and searches for dLAN adapters on your network.
Make sure that all of the dLAN adapters that you want to add to your network
are also connected to the power supply grid. If no active device is connected to
the Ethernet port, a dLAN adapter will go into standby mode after about 15 min-
utes. It cannot be configured while in standby mode.
햴
In the following dialog box select a common password for your dLAN net-
work and confirm your input with
Next .
The password set up initially by devolo is HomePlug .
햵
The dLAN adapters connected directly to your computer is detected auto-
matically. All other dLAN adapters have to be entered manually. Enter in