Network configuration 40
devolo dLAN 1200+ WiFi ac
4.6 LAN
You make changes to the network settings in the
LAN
area.
4.6.1 Status
You can see the current LAN status of the dLAN ad-
apters here. The
Ethernet
area shows the network
devices connected to the two network connectors
Port 1 and Port 2
(e.g. PC, NAS, etc.).
IPv4/IPv6
Depending on how the dLAN 1200+ WiFi ac is
connected to the Internet (IPv4 or IPv6), current
network information is displayed, such as
Address
,
Subnet mask
,
Standard gateway
and
DNS server
.
4.6.2 IPv4/IPv6 configuration
In the factory default settings, only the
Retrieve
network settings from a DHCP server
option for
IPv4
is enabled. This means that the IP address is
retrieved automatically from a DHCP server. The
currently assigned network data are visible (greyed
out).
If a DHCP server is already present on the network
for assigning IP addresses (e.g. your Internet rou-
ter), you should leave the
Retrieve network set-
tings from a DHCP server
option enabled so that
the dLAN 1200+ WiFi ac automatically receives an
address from it.
Содержание dLAN 1200+ WiFi ac
Страница 1: ...Manual dLAN 1200 WiFi ac...
Страница 2: ...devolo dLAN 1200 WiFi ac...