User’s Manual Version 1.2
Devolinx Serial-Ethernet Server
STE-601C
Copyright © 2007 Aaxeon Technologies, Inc.
All rights reserved.
- 22 -
4.3 Configuration set by Hyper Terminal console utility
1. Power off STE-601C.
2. Set the MODE switch SW1 to ‘OFF’ and SW2 to ‘ON’.
3. Use a PC to connect to STE-601C’s console with RS-232 cross over cable.
4. Power on STE-601C.
5. Open a Hyper Terminal program from your computer Start menu -> Programs -> Accessories ->
Communication -> Hyper Terminal, set COM2 parameters as follows.
-
Baud rate: 9600 bps
-
Data bit: 8 bits
-
Parity:
None
-
Stop bit: 1bit
-
Flow
control:
None
Note
:
At present time baud rate is fixed at
9600, 8, n, 1, without flow control
for console port communication,
RS-232C parameters of your computer COM port and STE-601C must be the same.
6. Once Hyper Terminal is connected, type in username and password then the following Hyper Terminal
window appears,
7. The following configuration operations are totally the same as those by Telnet.
8. After finishing console settings, power off STE-601C, put SW1 and SW2 back to the previous setting.