Devolinx STE-601C Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 51

Devolinx STE-601C Скачать руководство пользователя страница 13

User’s Manual Version 1.2
Devolinx Serial-Ethernet Server
STE-601C

Copyright © 2007 Aaxeon Technologies, Inc.

All rights reserved.

- 12 -

4. Software Configuration

4.1 Configuration set by monitor.exe utility

Use

monitor.exe

that comes with the product CD or diskette to configure the network parameters of

STE-601C. As you can see from the following picture, you can change IP address, gateway IP address,
subnet mask, user ID and password of STE-601C from the utility. For more details of the utility please refer
to Appendix-D Configuration Utility.

4.2 Configuration set by Telnet utility

You can use Telnet utility to change configuration settings of STE-601C. To do so, please do the following.

Log in to the system

Telnet to 51C-

MAXI

using command “

Telnet IP_address

”.

For example

Telnet 10.0.50.100

1. After telnet to STE-601C, system prompts for a password, the default password is null.

Note:

You can press the default button of STE-601C to reset the password to the default value.

2. After verifying the password, the following terminal screen appears.

«
...
11
12
13
14
15
...
»

Содержание STE-601C




















































Отзывы:

Нет отзывов