
with the appliance. Cleaning and user maintenance should not be
carried out by children without supervision.
•
Children of less than 3 years should be kept away unless continuously
supervised.
•
Children aged from 3 years and less than 8 years should only switch
the appliance on/off provided it has been placed or installed in its
intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3
years and less than 8 years should not plug in, regulate, clean, or
perform user maintenance on the appliance.
•
CAUTION
—some parts of this product can become very hot and
cause burns. Particular attention must be given where children and
vulnerable people are present.
SPECIFICATIONS
Model names
Voltage/Frequency
Power
DVSH20GS/
DVSH20GW/DVSH20GB
AC220-240V,
50/60Hz
2000W
INSTALLING THE DEVICE
The heater should be installed and used in accordance with
the safety standards outlined in this manual.
To avoid all dangers, follow the safety instructions.
- The installation must be done by the service agent or similarly qualified
persons to avoid a hazard.
- Important!
Make sure that there are no electric cables or other
installations (for example water pipes) near the drill holes. Make sure that
the appliance is securely horizontally fitted to the wall.
Drill two holes in the wall at least 2m above the floor and 25mm or more
from the corners of the room. Be sure to make the diameter just as same
as the expanding pipe. Fix two screws on the expanding pipe, keeping
10mm of the screw visible, and hang up the machine after the screws are
secure enough.
HEATING PREPARATIONS
Before inserting the plug into an electrical outlet, make sure that the
electrical supply in your area matches that on the rating label on the
unit.
1. Carefully remove the heater from the carton and plastic bag.
2. Place the heater on a firm level surface, ensuring the master button is
set to the “I” position. Put the power plug into an AC220-240V electrical
outlet, when the socket it switched on the device will make a beep
sound and the ‘Power Supply’ light will illuminate.
3. Turn the heater on by pressing the ON/OFF button on the remote
control, the default mode is set to blow out cold air.
330