8
Open Window Detection
•
When the heater is in operation it is automatically in open window detection mode and
will shut down if the ambient temperature rapidly falls below 3 degrees or more.
Delete Open Window Detection
•
Open window detection is an integrated function of the heater and cannot be switched
off, thus, the function is deactivated by ceasing power by pressing the power button (20).
Signal Sound
•
An acoustic signal sounds each time a key is pressed on the unit. If a button is held
continuously the unit will only signal once.
Child Lock
•
When the unit is in operation, press the up (10) and down (11) buttons simultaneously for
3 seconds. The control panel will now be locked. The temperature display (15) first shows
‘’[]“ and switches to solely displaying the room temperature after 5 seconds.
Unlock Child Lock
•
Method 1: Press the up (10) and down (11) buttons for 3 seconds and the child lock is
deactivated.
•
Method 2: Switch off the device using the power button (20). The unit will then enter
standby mode.
•
Method 3: Turn off the power supply by pressing the power switch (21).
CLEANING & MAINTENANCE
Cleaning
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
The heater requires regular cleaning to ensure trouble-free operation:
•
Unplug the heater from the mains supply before cleaning.
•
Ensure that the heater has been allowed to cool down completely before cleaning.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
•
Use a vacuum cleaner to remove dust and fluff from around the grilles.
•
Ensure the heater is dry before plugging back into the mains supply.
Service
When you require service, contact your local dealer.
Replacement of supply cord
If the supply cord is damaged must be replaced by a service agent or
equivalent qualified person to prevent a hazard.
