Use of the stage snake
The Devine SND stage snake series has been designed for professional use on stage. The SND snakes are
used to transmit groups of audio signals via one large multi-core cable, from the stage to a mixer and vice
versa. This way, you don't need a lot of separate cables to transmit all your audio signals from point A to B.
Labels
All connectors (cable connectors and panel chassis connectors) are equipped with their own cable colour
and a label which is used to distinguish the connectors from each other. This way, you always know which
connector is used for which channel.
Strain relief
All cable connectors are equipped with a transparent sleeve, which is also used as a strain relief for the
cable itself. This way, pulling a cable will never result in broken cable contacts, thus preventing signal loss
and other problems. A large metal strain relief for the main cable has been provided to prevent the cable from
pulling connectors from your mixing desk (the hook sees to this)
Locking connectors
The inputs of the cables and the outputs of the connector panel
are equipped with locking XLR connectors. This means that
once a cable is connected to one of these connectors, it stays
in place until you unlock the mechanism. This prevents sudden
signal loss because of a disconnected cable. To unlock, press
the metal mechanism and pull the plug at the same time.
Cable reel
The cable reel on which the cable is mounted also serves as a convenient transport and storage device. The
reel is equipped with a practical handle and stable feet for positioning on the floor (or at the side of a stage).
Furthermore, the reel is equipped with a practical brake, mounted on the rear of the drum. The brake is used
to prevent the reel from turning during transport. To activate the brake, turn the knob clockwise and tighten it
properly by hand. To release the brake, untighten the knob by turning it counter clockwise.
Technical specifications
SND 20/12/6
SND/25/16/8 SND 30/16/4
SND 30/24/8
Input channels
12x XLR
16x XLR
16x XLR
24x XLR
Output channels
6x XLR
8x XLR
4x XLR
8x XLR
Cable length
20m
25m
30m
30m
Cable reel with brake
Yes
Cable reel with feet
Yes
Protective bag for cable break-out
Yes
Metal strain relief for cable break-out
Yes
Shrinking tube for cable break-out
Yes
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 02-06-2014 RV Revision date + author initials: 02-06-2014 RV
