Devine MPS 1000 Скачать руководство пользователя страница 2

Introduction 

Thank you for purchasing the MPS 1000 phantom power supply unit. We advise that you read this user 
manual in its entirety before unpacking the contents of the box, so that you are familiar with all of the 
functionality that this product has to offer. Please be sure to check that all of the parts and accessories listed 
below under 'box contents' are included in the package. In the event that the MPS 1000 does not function 
properly, or if you have any issues while operating it, please remove the plug from the power socket and 
contact your dealer for assistance. 

Box contents:

- Devine MPS 1000 dual phantom power supply unit
- power adapter to CEE 7/16

Please inspect the device and the included accessories. 

Should you discover that either the device or one or more of the included parts were damaged or rendered 
defective while in transit, please contact your dealer directly. 

Please note that the pictures in this user manual serve illustrative purposes only and may differ from the 
product you receive.

Contact:

Devine Pro Audio Products

Verrijn Stuartweg 18

4462 GE Goes

The Netherlands

Please do not send any products to this correspondence address. 

Should you wish to send in a product for repairs or for a refund, please contact your dealer for an RMA

request (Return Merchandise Authorisation). 

The information in this user manual is subject to change at any time without notice. 

Version: 1.0 Date of creation and author's initials:26-01-2016 RV

Date of revision and author's initials:28-07-2016 RV

Содержание MPS 1000









Отзывы: