By pressing the Edit button once, the Transpose function is activated. While this mode has a
similar function to Octave, it shifts the pitch of the keyboard by half an octave. Press the Edit
button once more and the LED will start to blink, indicating that the Multi-Functional mode
has been activated. The keyboard can now serve a secondary function by accessing and/or
adjusting certain settings.
In Octave mode, the octave can be shifted by max. -3 or max. +3. The Transpose function
can be shifted by max. -12 or max. +12.
4. Connections
The EZ-Creator Key XL comes with the all of the connections required for controlling
hardware as well as software.
This starts with the fitted analogue 5-pin DIN port, so that this keyboard can be used as a
standalone device, as a secondary keyboard for a workstation, or as the controlling
keyboard for a synthesizer.
A socket to which a pedal can be connected has also been included. A simple sustain pedal
can be connected to this socket using a 6.35mm TS jack plug.
A USB-B port has also been included. This doubles as a power input as well as the MIDI
data output to a computer or laptop. The EZ-Creator Key XL can be powered via USB while
sending MIDI data via the 5-pin DIN port, making the device as versatile as possible.
System Requirements
So that your EZ-Creator model functions properly when connected to your computer or
laptop, the computer or laptop must meet the minimum system requirements. If your laptop
or computer does not meet the minimum system requirements, this may cause the EZ-
Creator to function incorrectly.
Windows
Mac OS
Pentium 3 800 MHz or higher
(laptop CPU may require higher)
256 MB RAM
DirectX 9.0b or higher
Windows XP (Service Pack 2) or higher
Windows 98, ME, NT and 2000 are not
supported
Macintosh G3* 800/G4 733 MHz or higher
(laptop CPU may require higher)
OS X 10.3.9 with 256 MB RAM,
OS X 10.4.2 or higher with 512 MB RAM
G3/G4 accelerator cards are not supported
Always check if any software and/or external equipment that you intend to use in
combination with the EZ-Creator specifies any minimum system requirements.
When powering the EZ-Creator via USB, it is recommended to connect it directly to the USB
port of your computer or laptop and avoid using any external USB hubs.
The information included in this user manual is subject to change at any time and without notification:
Version:
1.0
Date and author initials: 02-11-2020 RV
Revision date and author initials: -
