background image

Introduction 

Thank you for purchasing the Devine BM-100 condenser studio microphone. This studio microphone can be 
used for recording instruments and vocals. A shock mount is included with this microphone, which isolates 
the microphone and prevents vibrations.

The Devine BM-100 is a condenser studio microphone that re48V phantom power from a source 
such as an audio interface, PA mixer, preamp or similar device. The phantom power ensures that the 
microphone operates perfectly. When no +48V phantom power is present, the microphone will either not 
work, or produce a very weak signal. 

The cardioid polar pattern of the BM-100 means that most of the sound is captured from the front of the 
microphone. When recording a complete band, for example, the cardioid polar pattern keeps ambient sounds
and background noise (such as backing vocals, instruments, etc.) to a minimum. 

Please note that the BM-100 microphone is a highly sensitive microphone and should be handled with care 
when transported or installed. Impacts and/or severe vibrations may have a negative impact on the lifespan 
and performance of the microphone. 

Because the BM-100 microphone is highly sensitive, a shock mount is included to isolate it as much as 
possible from its mounting surface whichs prevents capturing unwanted vibrations or noise. It is therefore 
recommended to use the included shock mount when using this microphone. 

Before unpacking all the received items, carefully read this manual to familiarise yourself with the functions of
the microphone. Also, check the contents of the box to make sure all the necessary parts are included (see 
the “

Box contents

” section of this user manual). If the microphone fails to operate properly, or if you 

encounter any problems while using it, disconnect it immediately and contact your local dealer for more 
information and help.

WEEE: 

Dispose of this product properly. This product is part of the WEEE directive – the 

Waste Electrical and Electronic Equipment directive. The requirements stated in this directive 
apply to all manufacturers and producers of electronic equipment in the EU. 

Do not dispose of this product together with regular household rubbish. Contact your local 
government representative for more information about proper disposal and recycling of 
electronic products in your region. By recycling this product properly after use, we can work 
together to enjoy these products and protect our environment from pollution.

CE: 

The CE mark indicates that the product complies with applicable European directives and

regulations. 

Indoor use only: 

This device is designed to be used indoors only. The maximum ambient 

temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit)

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 10-12-2015 RV Revision date + author initials: -

Содержание BM-100








Отзывы: