background image

Operating the device

The Onyx subwoofers can be used for different purposes, but it's important to be aware of the following 
information beforehand in order to achieve optimal performance. 

Warning before use

Devine's Onyx subwoofers are capable of producing volume levels that can cause temporary or permanent 
hearing damage. Use these units with care and keep the volume at a reasonable level when possible. The 
volume should ideally be set to a comfortable level when listening to music. 

Devine cannot be held liable for any injuries or damage resulting from the use of this product. 

General use

Housing

The Onyx subwoofer has a robust housing with a wooden frame and internal bracing to give it added 
strength. The exterior has been given a special coating to protect it from light impacts and help prevent 
scratches. 

During use, storage and transport, ensure that the subwoofer cannot fall or be damaged by nearby objects 
that could fall or move. 

Handles

The Onyx subwoofers are equipped with handles on the side. With the exception of the 18-inch model, they 
have one handle on each side. Due to its size and weight, the 18-inch subwoofer is equipped with two 
handles on each side. 

The handles make it easier to pick up and move the subwoofer. It's possible to stack up to two subwoofers 
on top of another one for a maximum stack of 3. It's possible to use harnesses or tension straps when 
moving the subwoofer but please be aware that this may damage the finish on the handles.

Wheels

The 15-inch and 18-inch subwoofers are equipped with screw threads and bolts for mounting wheels. 
Standard 80 or 100 mm wheels from any reputable supplier can be used so long as they have bolt holes 
measuring 80 x 60 mm. Fixed or swivel castors are both suitable, with or without brakes. We recommend the
use of wheels with brakes so that the wheels are fixated during use and won’t make unnecessary noise 
during use. 

Whenever the subwoofer is transported in a vehicle like a car, bus or truck, we recommend placing it on its 
feet to prevent it from moving.

If you do not want to attach wheels to the subwoofer (because it will be placed in a permanent location, for 
instance), we recommend leaving the bolts in place to prevent holes in the housing which will cause 
additional air displacement. 

Protection during transport

While the Onyx subwoofers can be transported, they are not waterproof and caution is therefore advised if 
they taken outside during rain or in adverse weather conditions. If they are exposed to moisture in any form, 
ensure that they are completely dry again before use. Failure to do so may result in a short circuit which 
could cause permanent damage or injury. Exposure to moisture can also cause visible or invisible corrosion 
which may cause damage in the long term. 

Grille

The Onyx subwoofers are equipped with a metal grille on the front to protect the speaker components 
behind. There is also acoustic foam behind the grille to prevent any unwanted matter from getting inside the 
speaker. The grille should therefore not be removed. 

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials: 23-09-2017 RV

Revision date and author's initials: -

Содержание 9000-0035-1553












Отзывы: