SB-4-207-K (1/2018)
2 / 8
EN
www.carlisleft.com
IMPORTANT: Read and follow all instructions
and SAFETY PRECAUTIONS on Pages 1 and 4 before
using this equipment. Retain for future reference.
DESCRIPTION
Halogenated hydrocarbon solvents - for example:
1,1,1, - trichloroethane and methylene chloride - can
chemically react with aluminum parts and compo-
nents and cause an explosion hazard. Read the label
or data sheet for the material. Do not use materials
containing these solvents with the aluminum KB-
555 cup. Stainless steel model KB-545-SS may be
used with halogenated solvents.
Static electricity is produced when using an equip-
ment cleaner. Static electricity sparks may be cre-
ated during the cleaning operation. A spark from
static electricity may cause fire or explosion. If the
gun or tool attached to the fluid hose line is not
grounded, it will build a static charge. To prevent
sparks from static electricity, you must ground:
1. The Hose/Gun Cleaner.
2. The gun or tool attached to the fluid hose line
from the Hose/Gun Cleaner.
3. The waste container.
To ground equipment:
1. Use conductive air hose.
2. Attach one end of a ground wire to each item
listed above.
3. Attach the other end of the ground wire to a
water pipe, metal electrical conduit or any pipe
or structural member known to be grounded.
The DeVilbiss liner system is intended for use in a KB
II
pressure cup. The liner creates a barrier so the coating
cannot contact the cup or lid. The liner can be used with
any material that is compatible with polyethylene. The only
wetted cup part is the fluid tube which is either stainless
steel or aluminum.
KK-5051 Disposable Cup Liner Kit Includes:
20 liners
20 lids
3 rings
Figure 1
*KK-5052 Solvent Saver Attachment Kit Includes:
HD-410 Adapter Fitting Assembly
2' Hose Assembly
Recommended Replacement of Fluid Tube for KB
II
Cup:
*KK-4996 Stainless Steel
*KK-4997 Aluminum
*Order separately.
Lid
Liner
Ring
