background image

Page 8     SB-2-616-B

Scrubs

®

Hand Cleaner Towels

Scrubs® are a pre-moistened
hand cleaner towel for paint-
ers. No water is needed.

HAV-500 OR

HAV-501

Adjusting Valve

(HAV-501 SHOWN)

HAV-500 does not have
pressure gauge.  Use to
control air usage at gun.

WR-103 Wrench

HAF-507 Whirlwind™

In-Line Air Filter

Removes water, oil, and
debris from the air line.

Contains all necessary tip,
hose and nut sizes used on or
with gun.

ACCESSORIES

TGC-545 Aluminum

TLC-555 (Teflon Lined)

TCS-595 Stainless Steel

Drip Free Suction Cups

Cups have a unique, two
position valve which permits
selection of either a drip free or
conventional open vent mode.

Spray Gun Lube

SSL-10

(2 oz. bottle)

FLG-463

Air Cap Test Kit

(#3 Air Cap)

The purpose of this
test kit is to measure
air cap atomizing air
pressure at the
center air port of the
air cap.  Used to
confirm code
compliance and as a
daily quality control
measure.

Compatible with all
paint materials; con-
tains no silicone or
petroleum distillates
to contaminate paint.
MSDS available upon
request.

Industrial Quick Connects

Approved for HVLP Guns (Air)

High Flow Ball and Ring Type

HC-4419 1/4"

NPS(F)

HC-4699

1/4" NPT(M)

HC-1166

1/4" NPT(M)

HC-4700

1/4" NPT(F)

2/05   ©2005 Illinois Tool Works Inc.   All rights reserved.   Printed in U.S.A.

WARRANTY

This product is covered by DeVilbiss' 1 Year Limited Warranty.

DeVilbiss Worldwide Sales and Service Listing: www.devilbiss.com

ITW Industrial Finishing

DeVilbiss has authorized distributors throughout the world. For
technical assistance or the distributor nearest you, see listing below.

U.S./Canada Technical Service Office:

195 Internationale Blvd., Glendale Heights, IL 60139
Toll-Free Telephone: 1-888-992-4657 (U.S.A. and Canada only)
Toll-Free Fax: 1-800-368-8401

29-3100 (ITW Industrial Finishing)

192219

Gun Holder

Gun holder made to hold
guns with gravity cups.

GH-407

Gun Holder

(1) Wall mount bracket
included with GH-407.
Holds standard paint cups,
gravity feed guns and
cups, and paint filters.

NIOSH-Certified, for
respiratory protection
in atmospheres not
immediately dangerous
to life.

Millennium 3000

Twin Cartridge

Paint Spray

Содержание FLG-692









Отзывы: