DeVilbiss EGA-503, Руководство по обслуживанию

Страница: 2 / 8

SB-2-163-M (11/2014) 2 / 8
SAFETY PRECAUTIONS
This manual contains information that is important for you to know and understand. This information relates to USER SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following symbols. Please pay particular
attention to these sections.
Fire
Inhaling Toxic Substances
Explosion Hazard –
Incompatible Materials
1. Adequate exhaust must be provided to keep the
air free of accumulations of flammable vapors.
2. Smoking must never be allowed in the spray area.
3. Fire extinguishing equipment must be present in
the spray area.
4. Static discharges must be prevented. Ground
(earth) all conductive objects in the spray
area, such as a cleaning solvent bucket, fire
extinguisher, etc.
5. When using solvents for cleaning:
• Those used for equipment flushing must have
a flash point equal to or higher than that of the
coating.
• Those used for general cleaning must
have flash points above 100°F (37.8°C).
1. Follow the requirements of the Material
Safety Data Sheet supplied by your coating
manufacturer.
2. Adequate exhaust must be provided to keep the
air free of accumulations of toxic materials.
3. Use a mask or respirator whenever there is a
chance of inhaling sprayed materials. The mask
must be compatible with the material being
sprayed and its concentration.
This spray gun (spray pistol) has aluminum
passages and cannot be used with these solvents.
Aluminum is also widely used in other spray
application equipment – such as material pumps,
regulators, valves, etc. Check all other equipment
items before use. Read the label or data sheet for
the material you intend to spray. If in doubt as to
whether or not a coating or cleaning material is
compatible, contact your material supplier.
Solvents and coatings can be highly
flammable or combustible, especially
when sprayed.
Certain materials may be harmful if
inhaled or if there is contact with the
skin.
Halogenated hydrocarbon solvents,
for example" methylene chloride and
1, 1, 1, - Trichloroethane, are not
chemically compatible with the
aluminum that might be used in many
system components. The chemical
reaction caused by these solvents
reacting with aluminum can become
violent and lead to an equipment
explosion.
CAUSE SAFEGUARDS HAZARD
The following hazards may occur during the normal use of this equipment. Please read the following chart.
Important information that tells how to pre-
vent damage to equipment, or how to avoid
a situation that may cause minor injury.
NOTE
Information that you should pay special
attention to.
Important safety information – a hazard
that may cause serious injury or loss of
life.
CA PROP
65
PROP 65 WARNING
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.