background image

Page 9

SB-2-542-E

accESSorIES

These brushes are 

helpful in cleaning 

threads and recesses 

of gun body.

42884-214-K5 3/8"

42884-215-K10 5/8"

cleaning Brushes

HAV-500 does not have 

pressure gage.  Use to 

control air usage at 

gun.

HaV-500  or

HaV-501

adjusting Valve

(HAV-501 SHOWN)

Removes water, oil, 

and debris from the air 

line.

Haf-507 

Whirlwind™

In-line air filter

2 Gallon galvanized 

tank used to clean the 

inside of hose and 

material passages of 

the gun.

2 Qt Hose/Gun Cleaner 

used to clean the inside 

of hose, fluid passage-

ways of gun & other 

paint equipment. 

Compatible with all 

paint materials: 

contains no silicone or 

petroleum distillates to 

contaminate paint. 

MSDS sheet available 

upon request.

Spray Gun lube

SSl-10 (2 oz. 

bottle) 

Installs into gun to 

enable user to control 

and reduce air usage 

at the gun. Replaces 

SP-637 plug.

Sp-402-K air 

adjusting Valve

83GZ-5200 

SolventSaver™ 

Hose/Gun cleaner

HD-503 

SolventSaver™ 

Hose/Gun cleaner

p-H-5516 air 

adjusting Valve

Enables user to control 

and reduce air usage 

at the gun. Ideal for 

low pressure spraying.

HC-4700

1/4" NPT(F)

HC-1166

1/4" NPT(M)

HC-4699

1/4" NPT(M)

HC-4419 1/4" 

NPS(F)

quick Disconnect approved for

HVlp Guns (air)

High Flow Ball and Ring Type

1 Qt. pressure feed cups. 

3/8" NPS (F), cam lock lid. 

 

 

Requires KK-4980 air regu-

lator kit.

tlc-576 aluminum cup

(teflon lined) &  

tSc-591Stainless Steel cup

KB-555 (aluminum) & 

KB-545-SS (S/S) 2 qt. pressure 

feed cup With regulator

tGc-545 aluminum 

tGc-555 teflon lined 

tGc-595 Stainless Steel

 

Siphon cups

Provides greater 

degree of control 

over cup fluid pres-

sure.

Use to maintain nearly 

constant outlet pres-

sure despite changes 

in inlet pressure and 

downstream flow.

HarG-510  air

regulator

Contains all necessary 

tip, hose and nut sizes 

used on or with gun.

Spn-5  

Wrench

Scrubs

®

 are a pre-

moistened hand cleaner 

towel for painters. No 

water is needed.

29-3100 Scrubs

®

  

Hand cleaner 

towels

Fits Compact gun only.  

Compatible with DeVilbiss high 

flow quick disconnects.

mpV-60-K3

air Inlet Swivel

(pack of 3)

Sp-300p-10-K

Compatible with SP-200S-08-K (0.55 mm) and 

SP-200S-10-K (1.0 mm) fluid tips

Sp-300p-14-K

Compatible with SP-200S-14-K fluid tips

plastic tipped fluid needle

For trapping foreign 

particles in the paint 

supply.

plH-mf-6-100  

mini-Strainer  

(100 mesh)

83c-220  

2 Gallon tank

80-600  

SG2 plus cup 

80-295 cup 

Zinc plated tank.

2 qt. cup. Waterborne 

compatible when 

80-356 liner is used.

2 qt. aluminum cup 

with regulator.

millennium 3000

 

 

twin cartridge paint Spray respirator

NIOSH-Certified, for respiratory protection in atmo-

spheres not immediately dangerous to life.

40-141 Small

40-128 medium

40-143 large

Содержание Compact TRANS-TECH





















Отзывы: