DeVilbiss Compact COM-P522B-14, Руководство по эксплуатации

Страница: 2 / 12

© 2003 ITW Finishing Systems and Products
2
Operation Manual
COMPACT – Pressure Feed Spraygun
Important
Read and follow all instructions and Safety Precautions before using this
equipment
Description
The Compact pressure feed Spraygun Kit complies to ATEX regulations 94/9/EC , protection
level;
II 2 G X, Suitable for use in Zones 1 and 2
Important:
: These Sprayguns are suitable for use with both waterbased and solvent based
coating materials. The design uses EPA compliant (Devilbiss Trans-Tech®) and HVLP
atomising technology to reduce overspray and improve coating efficiency. These guns are not
designed for use with highly corrosive and/or abrasive materials and if used with such materials
it must be expected that the need for cleaning and/or replacement of parts will be increased. If
there is any doubt regarding the suitability of a specific material contact your local Distributor or
ITW Finishing direct.
E
E
Model Part Number
Example:
COM-P522B-14
Aircap
Fluid nozzle size
(14 = 1,4 mm)
Gunbody Finish
B = Blue Anodised
ITW Finishing Systems and Products reserve the right to modify equipment specification without
prior notice.
EC Declaration of Conformity
We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK , as the
manufacturer of the Spraygun model Compact , declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive ,
and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X .
This product complies with the requirements of the EPA guidelines, PG6/34,PG6/20 and
PG6/23. Achieving transfer efficiency in excess of 65%.
B. Holt, General Manager
30th June 2003