3
CONNECTING THE HAND CONTROL TO THE BATHLIFT:
PUT THE CONNECTOR OF YOUR CHARGED HAND CONTROL AND
THE CONNECTOR ON THE BACK OF THE BATHLIFT TOGETHER.
PUT THE CLIP IN PLACE OVER THE PRONGS ON THE
CONNECTORS (AS SHOW IN THE PICTURES BELOW).
DISCONNECTING THE HAND CONTROL FROM THE BATHLIFT:
REMOVE THE HAND CONTROL FROM THE BATHLIFT BY UNCLIPPING THE CLIP
AND PULL THE HAND CONTROL CONNECTOR AND THE BATHLIFT CONNECTOR
APART.
HOW TO REMOVE THE BATHLIFT FROM THE BATH:
PUSH THE TWO SIDE FLAPS INWARD ONTO THE SEAT.
PUSH THE BACKREST FORWARD SO THAT IT LIES
FLAT ONTO THE SEAT.
WITH THE BACKREST FOLDED FORWARD ONTO THE
BATHLIFT SEAT, LIFT THE BACKREST FROM THE BASE
IN AN UPWARDS MOTION.
TO REMOVE THE SEAT, PLACE ONE HAND ON THE
LIFTING BAR AT THE REAR OF THE BASE AND LIFT TO
RELEASE THE BATHLIFT FROM THE BATH. CONTINUE
TO LIFT AND THE SUCTION FEET AT THE FRONT OF
THE BATHLIFT WILL RELEASE AUTOMATICALLY.
PLACE YOUR OTHER HAND ON THE FRONT OF THE
BATHLIFT AND LIFT IT OUT OF THE BATH.
PUSH DOWN
FOLD IN
LIFT OFF
LIFT OUT
PRESS THE “DOWN” BUTTON ON THE HAND CONTROL
AND TAKE THE BATHLIFT TO ITS LOWEST FULLY
RECLINED POSITION IN THE BATH.
REMOVE THE HAND CONTROL FROM THE BATHLIFT BY
UNCLIPPING THE CLIP AND PULL THE HAND CONTROL
CONNECTOR AND THE BATHLIFT CONNECTOR APART (AS
SHOWN ABOVE).
