RoHS
MD3 Series
Tamper Proof Internal Dome Camera
Quick Installation Guide
＊
US Patent Pening
Type / Format
NTSC
PAL
Scanning Element
2:1 Interlace, 2:1 Interlace,
H15.734KHz / V :59.9Hz
H15.625KHz / V :50Hz
Image Picture Element
1/3” Interline CCD
Effective Picture Element
510(H) x 492(V)
500(H) x 582(V)
Resolution (TV lines)
330
Minimum Illumination
0.7 Lux @ F1.6
S/N Ratio
48dB
Back Light Compensation
Central Area for DC IRIS Lens
Exposure Control
DC Type Auto IRIS Control
Sync System
INT
Gamma Compensation
0.45
Video Output
1.0Vpp, 75
Ω
Unbalanced
White Balance
Automatic White Balance
Auto White Ballance Range
2500K – 9700K
Power Range*
DC 12V ±10%
Power Consumption
1.6W (Max)
Operating Temperature
Storage Temperature
MD3CN12M
MD3CP12M
-10
°
C ~ +50
°
C
-20
°
C ~ +60
°
C
NTSC
PAL
2:1 Interlace, 2:1 Interlace,
H15.734KHz / V :59.9Hz
H15.625KHz / V :50Hz
1/3” Interline CCD
768(H) x 494(V)
752(H) x 582(V)
480
1.2 Lux @ F1.6
48dB
Central Area for DC IRIS Lens
DC Type Auto IRIS Control
INT
0.45
1.0Vpp, 75
Ω
Unbalanced
Automatic White Balance
2500K – 9700K
DC 12V ±10%
1.8W (Max)
MD3CN12H
MD3CP12H
-10
°
C ~ +50
°
C
-20
°
C ~ +60
°
C
General Specification
Focal Length
4mm~9mm
F-No.
F1.6
Iris Range
F1.6~F2.4
Minimum Object Distance
4mm (71.3x48.3 cm)
9mm (28.3x20.8cm)
Field Of View
Diagonal
92.8º~39.4º
Horizontal
71.0º~31.6º
Vertical
51.6º~23.6º
Lens Specification
Funtion Control
Electronic Shutter
BLC
AGC-UP
Low Light Chroma Suppression
------
ON/OFF
ON/OFF
AUTO
Regulatory Compliance
Emissions
FCC part 15 Class B
CE:
EN55011
ICES-003
EN55022
CISPR
11
CISPR22
ANSI
C63.4
Immunity
CE: EN50130-4
RoHS
FCC COMPLIANCE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against armful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help.
CISPR 22 WARNING:
This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
POWER SUPPLY REQUIREMENTS:
For use with listed Audio/Video product and only connected to 15W or less power supply.
*Power supply should be a NEC Class 2 / LPS Supply.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly approved by seller.
The party responsible for FCC compliance could void the user’s authority to operate the equipment and could create a
hazardous condition.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Please visit our website for more information
www. deview.com
T1
T2
Side Knock-out
Side Knock-out
Side Knock-out
Side Knock-out
Template
Cable access
When the cables are threaded through the mounting surface,
create an apture indicated “
T2
”. It can be simply threaded for
use with the quick install adapter .
When mounting the dome on a surfce with the four
T1
screws,
use one of the side knock-outs as indicated for cable entry
(see Installation Guide overleaf ).
Surface mount (In a wall or ceiling)
Using Quick Install Adaptor:
Create an aperture in the mounting surface to a diameter of
1.5” (38mm) as indicated by “
T2
”.
The aperture is also avaliable for cable access (3/4”, 19mm).
Using screws:
Create four holes at template positions ‘
T1
’, use the screws
and plugs provided in the screw kit where the mounting
surface is appropriate.
Cable Access
T1
T1
T1
A1
: Focus Adjuster
A2
: Field of View Adjuster
A1
A2
Camera Adjustments
A3
: Function Control Dip Switches
＊
A4
: AI Level Adjustment
＊
AI Level Adjustment is factory set.
Should not normally require adjustment
A3
A4
Hardware Kit Contents
• 1/2” Rubber Grommet
• 3/4” Rubber Grommet
• Screw Pack
• Torx Driver
• Optional Quick Install Adaptor
• Wire-ended Power Adaptor lead
Switch 2
ON
OFF
Back Light Compensation
Auto Gain Control
OFF
(Normal Mode)
ON
(Turbo Mode)
Switch 1
Function Control Dip Switches
12VDC
GND
Red : +12VDC
Black: 0 VDC
Connecting Video-Power Cables
Video Output
Power Input
Wire-ended Power Adaptor Lead
V531-DF000-240
Ver A.070615
