DeviceWell HDS7105S, Руководство пользователя

Страница: 25 / 28

25
SWITCHER
2. Upgrade firmware
Continue the above steps, double-click
the device model you want to upgrade
in the left device column, drag the
firmware provided by Zhongdiwei into
the upgrade tool, click the upgrade
button, the device will automatically
upgrade, and the software will display
upgrade after the
upgrade is successful
Success; as shown in the figure below
(note that the device cannot be powered
off and unplugged during the upgrade
process)
3.
What to do if the software cannot
find the device
The first method: first check whether the
IP settings of the switcher device are set
to dynamic IP acquisition (DHCP), and
operate the network setting function in
the menu through the knob; if the
switcher has been set for dynamic IP
acquisition, connect the LAN cable of the
LAN to the switcher , Your LAN will
automatically assign an IP address to the
switcher. At this time, you can search for
the device again when you search again;
as shown below
The second method: directly connect the
switcher to the computer with a network cable,
first set the switcher to the static IP function,
and use the knob to operate the network setting
function in the menu;
Fix the switcher with an IP address. For
example, if the switcher is fixed at
192.168.1.20, the computer must be set to a
fixed IP address.
To set the IP address of the computer, open the
Network and Sharing Center → click Local
Area Connection → click Properties →
double-click Internet Protocol Version 4 (TCP
IPv4). An IP address setting page will appear.
Select the IP address below and manually fill it
in IP address 192.168.1.30, manually fill in the
subnet mask 255.255.255.0, and finally click
OK.