Website:
www.devicewell.com
Email:
26
HDS6112
The MIX blend effect is a transition effect. After setting, the transition will have the original live
screen fade in the main output and then disappear until it disappears completely to the new live
screen, as shown below.
7.5.2
FADE In and Out
Transition
Effects
Select the effect control area FADE and click to use the T-bar or AUTO to switch.
7.5.3
WIPE Transition Effects
Press WIPE to select the mode of the wipe, there are 4 modes.
As shown on the right
After selecting the way of the wipe, click on AUTO or push the T-bar
You can see the effect of the switch. If selected
, the effect is as shown below:
7.5.4
PIP Picture-In-Picture Special Effects
When the T-bar is operated in the B-BUS state, the PIP button
will have a small screen
appearing in the upper left corner of the preview. The source signal of the SDI1 is displayed by
default. The default background is PVW. As shown below
Select the effect control area MIX and then click to use the T-bar or AUTO to switch.
