Website:
www.devicewell.com
Email:
23
HDS6112
7.3.4
PGM Output Black Field
In the integrated control area FTB button FTB, this button function is: PGM output black field,
press the FTB button will flash the main output will be blackened, can deal with various
emergencies, the effect is as shown below.
If the PGM output is found to be black and it is still black after the transition, please check if
the FTB button is pressed (flashing). Press again to turn off the black field.
7.3.5
SD Card Recording
SD Card
You can use the SD card to record video. After inserting the SD card normally, press the REC
button to record the PGM output video. To pause, you can click the PAUSE button.
Note: (Before using the SD card, format the SD card first, the SD card supports the FAT32/exFAT
file format, and supports up to 128G SD card; if the recording is paused and recorded, if the power
is turned off, the file will be damaged and cannot be played).
The recorded resolution is the same as the PGM output.
The recorded bit rate is divided into 4 levels: low 6M, medium 12M, high 18M, and ultra high
24M. (can be set in the menu)
Note: After switching the output format, if you want to record, please record after re-powering; if
the inserted SD card does not recognize the remaining capacity, please re-insert the SD card or
replace the SD card.
The video file recorded by the SD card is automatically segmented at 1.95G, and the recorded
