E-6
17. Set the PF-602 onto the machine. Clamp the
machine installation plate/2 with the PF-602
installation plate.
18. Adjust the PFU adjusters (4) to make sure the
pin hole on installation plates/1 and 2, which
were attached to the machine line up with the
installation plates from PF-602.
(1) Remove the PF-602 back cover/2. (9 screws)
(2) Adjust with a spanner.
(3) Pull out the upper tray and check if the gap
between the PFU frame and tray guide board
is 2mm and more. If the gap is less than 2mm,
adjust the gap by raising the two adjusters of
the PFU right side.
19. Fix the PF-602 to the machine.
(1) Fix the PF-602 and the installation plate on the
machine using fixing pin/1. (TP screw M4x6: 1
pc.)
(2) Fix the back side of the PF-602 with fixing pin/
2. (TP screw M4x6: 1 pc.)
(3) Attach the PF-602 back cover/2. (9 screws)
A03XIXE020SA
Installation plate
Installation plate/2
Machine
PF
Pin hole
A03XIXE021SA
Back cover/2
A03XIXC016SA
A03XIXE031SA
Gaps being more than 2mm.
PFU frame
Tray guide board
PFU frame
Tray guide board
A03XIXE022SA
Fixing pin/1
TP screw M4x6
A03XIXE023SA
TP screw M4x6
Fixing pin/2
Back side
