manualshive.com logo in svg

Develop ineo+ 220, Быстрое руководство

Продукт Develop ineo+ 220 - это многофункциональное устройство для офиса. Бесплатно скачайте быстрое руководство по эксплуатации и полное руководство с сайта manualshive.com. Получите доступ к важной информации о работе с устройством, чтобы повысить эффективность работы в вашем офисе.

Поделиться
Скачать
background image

ineo+ 220/280/360 (Version 3)

11-11

11.2

Trademarks and copyrights

11

* Neither the name of Red Hat, Inc., nor the names of its contributors may be used to endorse or promote 
products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Portions funded by Sandia National Laboratory and developed by the University of Michigan's Center for 
Information Technology Integration, including the PKINIT implementation, are subject to the following license:

COPYRIGHT © 2006-2007

THE REGENTS OF THE UNIVERSITY OF MICHIGAN

ALL RIGHTS RESERVED

Permission is granted to use, copy, create derivative works and redistribute this software and such derivative 
works for any purpose, so long as the name of The University of Michigan is not used in any advertising or 
publicity pertaining to the use of distribution of this software without specific, written prior authorization. If 
the above copyright notice or any other identification of the University of Michigan is included in any copy of 
any portion of this software, then the disclaimer below must also be included.

THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE UNIVERSITY OF 
MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND WITHOUT WARRANTY BY THE UNIVERSITY OF 
MICHIGAN OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE 
REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING 
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM 
ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS 
HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

The pkcs11.h file included in the PKINIT code has the following license:

Copyright 2006 g10 Code GmbH

Copyright 2006 Andreas Jellinghaus

This file is free software; as a special exception the author gives unlimited permission to copy and/or 
distribute it, with or without modifications, as long as this notice is preserved.

This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, to the extent 
permitted by law; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR 
PURPOSE.

WPA Supplicant

Copyright ©2003-2005, Jouni Malinen <[email protected]> and contributors
All Rights Reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that 
the following conditions are met:

1.

Redistributions of source code must retain the above copyright notice, this list of conditions and the 
following disclaimer.

2.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the 
following disclaimer in the documentation and/or other materials provided with the distribution.

3.

Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be 
used to endorse or promote products derived from this software without specific prior written 
permission.

Содержание ineo+ 220















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ineo+ 220

Canon imageCLASS Mf6160dw Getting Started Manual preview
imageCLASS Mf6160dw
Бренд: Canon Страницы: 64
Canon imageCLASS MF6500 Series Advanced Manual preview
imageCLASS MF6500 Series
Бренд: Canon Страницы: 132
Canon imageCLASS MF5550 Software Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 120
Canon imageCLASS MF5630 User Manual preview
imageCLASS MF5630
Бренд: Canon Страницы: 85
Canon imageCLASS MF5550 Basic Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 136
Canon IMAGECLASS MF7400 Starter Manual preview
IMAGECLASS MF7400
Бренд: Canon Страницы: 40
Canon imageCLASS MF5850dn Settings Manual preview
imageCLASS MF5850dn
Бренд: Canon Страницы: 34
Canon imageCLASS MF6500 Series Starter Manual preview
imageCLASS MF6500 Series
Бренд: Canon Страницы: 16
Canon imageCLASS MF6540 Software Manual preview
imageCLASS MF6540
Бренд: Canon Страницы: 82
Canon imageCLASS MF5550 Facsimile Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 99
Canon imageCLASS MF5630 Quick Reference Manual preview
imageCLASS MF5630
Бренд: Canon Страницы: 24
Canon imageCLASS MF5770 Setup Sheet preview
imageCLASS MF5770
Бренд: Canon Страницы: 2
Canon imagePRESS C7000VP Series Customer Expectation Document preview
imagePRESS C7000VP Series
Бренд: Canon Страницы: 48
Canon imageClass MF5650 Parts Catalog preview
imageClass MF5650
Бренд: Canon Страницы: 40
Canon imageCLASS MF5770 User Manual preview
imageCLASS MF5770
Бренд: Canon Страницы: 8
Canon imageCLASS MF4880dw Starter Manual preview
imageCLASS MF4880dw
Бренд: Canon Страницы: 36
Canon imageCLASS MF4890dw Basic Operation Manual preview
imageCLASS MF4890dw
Бренд: Canon Страницы: 116
Canon ImageCLASS MF4690 Reference Manual preview
ImageCLASS MF4690
Бренд: Canon Страницы: 387

Бренды по названию

Популярные бренды

Загрузить еще бренды