Develop ineo+ 220 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 302

Develop ineo+ 220 Скачать руководство пользователя страница 13

ineo+ 220/280/360 (Version 3)

1-5

1.2

Safety information

1

•

Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull
on, or damage the power cord. Use of a damaged power cord (exposed
core wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your
authorized service representative.

Power source

WARNING

•

Use only the specified power source voltage. Failure to do that could re-
sult in a fire or electrical shock.

•

Connect power plug directly into wall outlet having the same configura-
tion as the plug. Use of an adapter leads to the product connecting to in-
adequate power supply (voltage, current capacity, grounding), and may
result in fire or shock. If proper wall outlet is not available, the customer
shall ask qualified electrician for the installation.

•

Do not use a multiple outlet adapter nor an extension cord in principle.
Use of an adapter or an extension cord could cause a fire or electrical
shock.
Contact your authorized service representative if an extension cord is re-
quired.

•

Consult your authorized service representative before connecting other
equipment on the same wall outlet. Overload could result in a fire.

CAUTION

•

The outlet must be near the equipment and easily accessible. Otherwise
you can not pull out the power plug when an emergency occurs.

Power plug

WARNING

•

Do not unplug and plug in the power cord with a wet hand, as an electrical
shock could result.

•

Plug the power cord all the way into the power outlet. Failure to do this
could result in a fire or electrical shock.

CAUTION

•

Do not tug the power cord when unplugging. Pulling on the power cord
could damage the cord, resulting in a fire or electrical shock.

•

Remove the power plug from the outlet more than one time a year and
clean the area between the plug terminals. Dust that accumulates be-
tween the plug terminals may cause a fire.

Power cord

«
...
11
12
13
14
15
...
»

Содержание ineo+ 220















































































































































































































































































































Отзывы:

Нет отзывов