Develco Squid.link 2X Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 12

background image

GetStartedGuide.md

6/3/2021

1 / 12

Connect Smoke Safety Basic Kit to your Azure IoT

services

Table of Contents

Introduction
Prerequisites
Prepare the Device
Connect to Azure IoT Central
Integration with Azure IoT Explorer
Additional links

Introduction

About this document

This document describes how to connect the Smoke Safety Basic Kit to Azure IoT Hub using the Azure IoT
Explorer with certified device application and device models.

IoT Plug and Play certified device simplifies the process of building devices without custom device code. Using
Solution builders can integrated quickly using the certified IoT Plug and Play enabled device based on Azure
IoT Central as well as third-party solutions.

This getting started guide provides step by step instruction on getting the device provisioned to Azure IoT
Hub using Device Provisioning Service (DPS) and using Azure IoT Explorer to interact with device's capabilities.

Prerequisites

You should have the following items ready before beginning the process:

For Azure IoT Central

Azure Account
Azure IoT Central application

For Azure IoT Hub

Azure IoT Hub Instance
Azure IoT Hub Device Provisioning Service
Azure IoT Public Model Repository

Prepare the Device.

Development Environmental setup

1
2
3
...
»

Содержание Squid.link 2X













Отзывы:

Нет отзывов

Похожие инструкции для Squid.link 2X

Бренд: B&B Electronics Страницы: 60

Бренд: Gallagher Страницы: 2

Бренд: Yes Страницы: 2

MultiConnect Conduit

Бренд: Multitech Страницы: 37

Бренд: System Sensor Страницы: 10

Бренд: THOMSON Страницы: 4

Бренд: Moxa Technologies Страницы: 7

Бренд: Grandstream Networks Страницы: 20

MultiVOIP MVPFX2-8

Бренд: Multitech Страницы: 8

Бренд: Zipato Страницы: 36

Бренд: SAGEMCOM Страницы: 60

Smart Command 410100

Бренд: Caroma Страницы: 2

Бренд: eQ-3 Страницы: 44

Бренд: UNION Market Страницы: 36

Бренд: VOPtel Страницы: 38

Бренд: Bpt Страницы: 8

Бренд: Comcast Страницы: 5

Бренд: Watchguard Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды