![Devel XPT Series Скачать руководство пользователя страница 3](http://html.mh-extra.com/html/devel/xpt-series/xpt-series_user-manual_2488629003.webp)
- 3 -
1.
Important
Safety
Information
WARNING!
This manual contains important instructions for all XPT Inverter/Charger models that
shall be followed during installation and maintenance of the inverter.
1
‐
1.
General
Safety
Precautions
1. Before installing and using the XPT Inverter/Charger, read all instructions and cautionary markings on the
XPT Inverter /Charger and all appropriate sections of this guide. Be sure to read all instructions and
cautionary markings for any equipment attached to this unit.
2. This unit is designed for indoor use only. Do not expose the XPT Inverter/Charger to rain, snow, or spray.
3. To reduce risk of fire hazard, do not cover or obstruct the ventilation openings. Do not install the XPT
Inverter/Charger in a zero-clearance compartment. Overheating may result.
4. Use only attachments recommended or sold by the manufacturer. Doing otherwise may result in a risk of
fire, electric shock, or injury to persons.
5. To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire
is not undersized. Do not operate the XPT Inverter/Charger with damaged or substandard wiring.
6. Do not operate the XPT Inverter/Charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way. If the XPT Inverter/Charger is damaged, see the Warranty section.
7. Do not disassemble the Inverter/Charger. It contains no user-serviceable parts. See Warranty for
instructions on obtaining service. Attempting to service the XPT Inverter/Charger yourself may result in a
risk of electrical shock or fire. Internal capacitors remain charged after all power is disconnected.
8. The XPT Inverter contains more than one live circuit (batteries and AC line). Power may be present at
more than one source. To reduce the risk of electrical shock, disconnect both AC and DC power from the
XPT Inverter/Charger before attempting any maintenance or cleaning or working on any circuits connected
to the XPT Inverter/Charger. Turning off controls will not reduce this risk.
9. Use insulated tools to reduce the chance of short-circuits when installing or working with the inverter, the
batteries, or PV array.
1
‐
2.
Precautions
When
Working
with
Batteries
1. Make sure the area around the battery is well ventilated.
2. Never smoke or allow a spark or flame near the engine or batteries.
3. Use caution to reduce the risk or dropping a metal tool on the battery. It could spark or short circuit the
battery or other electrical parts and could cause an explosion.
4. Remove all metal items, like rings, brace lets, and watches when working with lead-acid batteries.
Lead-acid batteries produce a short circuit current high enough to weld metal to skin, causing a severe
burn.
5. Have someone within range of your voice or close enough to come to your aid when you work near a
lead-acid battery.
6. Have plenty of fresh water and soap near by in case battery acid contacts skin, clothing, or eyes.
7. Wear complete eye protection and clothing protection. Avoid touching your eyes while working near