- 11 -
Photovoltaic (PV) modules in a manner that allows the modules to produce all the power they are capable of.
The PV-seeker Charge controller is a microprocessor-based system designed to implement the MPPT.
And it can increase charge current up to 30% or more compared to traditional charge controllers
(See Table 2.5.4).
Table 2.5.5 Current, Power Vs. Voltage Characteristics
The Charge controller built in is with 12/24/48V battery voltage auto detecting function.
For 12/24VDC inverter, the output voltage of solar charger will be accordingly 12/24VDC, and the qualified
DC input volt range is 15v-55VDC.
For 48VDC inverter, the output voltage of solar charger will be accordingly 48VDC, and the qualified DC
input volt range is 55v-110VDC.
If the voltage falls out of this range, the charger will not work properly. Special attention should be paid to
this when configuring the solar array.
2.4.6
Automatic
Voltage
Regulation(Optional)
The automatic voltage regulation function is for full series of XPTPure Sine Wave Inverter/ Charger except
split phase models including XPT1000W~6000W.
Instead of simply bypassing the input AC to power the loads, the XPT-SV series inverter stabilizes the input
AC voltage to a range of 230V/120V
±
10%.
Connected with batteries, the XPTS Series inverter will function as a UPS with max transfer time of 10 ms.
With all the unique features our inverter provides, it will bring you long-term trouble free operation beyond
your expectation.
Function Introduction
