Devatec ElectroVap KIT MC 15 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 48

Devatec ElectroVap KIT MC 15 Скачать руководство пользователя страница 41

ELECTROVAP® KIT MC

41

5.6

WATER INLET VALVE

Maintenance of the water inlet valve is to be done after
the first 50 hours of operation. Thereafter, twice a year
(minimum).

•

Switch the appliance off.

•

Switch off the water supply to the humidifier and
unscrew the water supply hose.

•

Disconnect the power cables from the water inlet
valve of your humidifier (Item 1).

•

Loosen the clamp and remove the water supply
hose. (Item 2)

•

Unscrew the two screws securing the valve (Item 3).

•

Pull out your valve, remove the filter with pliers and
remove the coil (Item 4) by prying it off with a
screwdriver.

•

Run water through the valve body and over the filter
to remove any particles.

Once all these operations completed, please reassemble the unit, taking care to check the condition
of the water supply hose clamp. You can put your appliance back into service.

Ensure that all the clamps are properly tightened whenever the humidifier is maintained.

Fig. 6-6.

Water inlet valve

«
...
39
40
41
42
43
...
»

Содержание ElectroVap KIT MC 15

















































Отзывы:

Нет отзывов