ESP32LR42
User Manual v1.02
IP
Sets the modules IP address.
Enter IP followed by the required IP address. Entering address 0.0.0.0 means the IP will be
obtained from your networks DHCP server. The new IP address will take effect after the
next re-boot.
IP “192.168.0.123”
OK. Saved IP Address: 192.168.0.123
SB Sets the SuBnet mask.
SB “255.255.255.0”
OK. Saved Subnet Mask: 255.255.255.0
GW Sets the GateWay address.
This is normally the IP address of your router.
GW “192.168.0.1”
OK. Saved Gateway Address: 192.168.0.1
PD Sets the Primary DNS.
The can be the IP address of your router which will then use your ISP provided DNS.
You can also specify the DNS such as 8.8.8.8 for Googles DNS server.
PD “192.168.0.1”
OK. Saved Primary DNS: 192.168.0.1
SD Sets the Secondary DNS.
The can be the IP address of your router which will then use your ISP provided DNS.
You can also specify the DNS such as 8.8.4.4 for Googles DNS server.
SD “8.8.4.4”
OK. Saved Secondary DNS: 8.8.4.4
Copyright
© 2018,
Devantech Ltd.
All rights reserved.
5
