DEVA DB44, Инструкция по техническому обслуживанию и эксплуатации

Страница: 19 / 46

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 19 -
NETWORK SETTINGS
After connecting the network cable the Led ‘LAN’ located on the rear panel must be ON or
flashing. The next and most important step for configuration is the adjustment procedure of the
Network Communication. The settings shown below are Default Network Settings:
IP : 192.168.1.2
Mask : 255.255.255.0
Gateway : 192.168.1.1
DNS : 192.168.1.1
DHCP : Disabled
HTTP Port : 80
Stream Port : 5000
SNMP Agent Port : 161
SNMP Manager IP : 192.168.1.1
SNMP Manager Port : 162
DB44 is controlled through the built-in web server and a standard web browser can be used
to monitor its status or make some adjustments. To connect to the device you need to know its IP
address and follow the next steps:
• Open a WEB Browser.
• Enter the device IP address in the browser’s address field.
NOTE: If the port is different than the default one (80), it is necessary to specify it, e.g.
http://192.168.1.2:9000
• Press <ENTER>.
If you do not know the IP address you can access DB44 by using UPnP discovery in local
networks (see “UPnP and DB44 discovery in Local Networks” on page 43).
ATTENTION:
Depending on Internet Protocol Settings, assigned IP address may not be visible
outside your local network, thus device may be accessed only within that network. Consult with
your network administrator for the appropriate IP settings.