Connect the device to a local network or to the Internet by the applied LAN cable.
Through
the Front
panel navigational menu
,
pressing the “OK” button will
enable you to
enter the device main menu
.
Using
the “
Down
” navigational button find
menu, and press the
button to enter it. Then,
press the “DOWN” button
and navigate to
and press the
“OK”
button to enter it.
This
operation will
visualize
the screen containing information about the IP Address of the device.
4.COMMUNICATION
4.2 NETWORK
“OK”
Manual IP Address Identification
STEP 5.1
There are two options
for
access to the WEB Interface of
SmartGen 6.0
. The first one is
through
manual identification of the IP address of the device, and the second one is t
h
rough
the
Network discovery
option
(
For Windows 7
and above
users only
)
.
WEB Interface
STEP 5
SmartGen 6.0
can be
operated in three
methods. Through the Front panel navigational menu
,
SmartGen Encoders Manager Software
or
via
a standard WEB Browser.
For more information about
the Front panel navigational menu
and Software,
please refer to the
complete user manuals
which
are available at www.devabroadcast.com
Configuration
STEP 4
Loop-through operation mode
STEP 3
If Loop-through operation mode is chosen, the RDS OR MPX OUTPUT includes the composite MPX
program signal to the RDS sub carrier. In loop-through mode the internal bypass relay will pass-through
the multiplex signal in case of an encoder power failure event.
"Loop-through" Encoder Connection
1.
generator directly to the PILOT OR
MPX INPUT of SmartGen 6.0;
2. Connect the RDS OR MPX
OUTPUT of the encoder to the
composite/MPX wideband input of
the FM exciter.
Connect the output of the stereo
4.2 NETWORK>1. DHCP :Enabled
2. IP :192.168.020.068
FM STEREO GENERATOR
MPX OUTPUT
SmartGen 6
1
2
3
WIDEBAND INPUTS
FM EXCITER / TRANSMITTER
PILOT
/
MPX
IN
RDS
&
MPX
OUT
RDS
OUT
LAN
GPS
GPIO
COM1
COM2
1
2
