SmartGen Encoders Manager
STEP 6
1
3
4
Upon completion of the instillation process, a shortcut to the software will appear on the
desktop of your PC. A double click on the shortcut will open the main application window.
Most of the functions will be disabled. In order to enable them, a connection with the
device should be established.
See below the control window representation:
Communication Mode Configuration
STEP 7
1. Press the 'Settings' button, located on the
bottom-left corner
.
Settings dialog window will
appear;
2. Click on the
Refresh button
and using the drop
down menu select the proper COM Port. ;
3. Press OK and exit the Settings Menu;
4. Different communication modes can be easily
changed via the short-cut placed on the bottom
right of the screen
. Select COM
communication mode and press Connect;
5. Once read, the Hardware configuration will be
visible and ready for editing. The Basic and
Advanced RDS and the Console tabs will be
activated.
(1)
(2)
(3)
2
NOTE:
Please note that upon completion of the USB installation process, the USB will be referred to as
COM port. The COM port number varies depending on the number of COM connections.
The connection status is visible on the bottom-right part of the screen
.
(4)
