DEVA Broadcast DB4402-V2 Скачать руководство пользователя страница 40

Страница: 40 / 70

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 40 -

FTP Server

[Enabled]/[Disabled] the FTP Server. Specify the Command and Data Ports to be used.

Audio Stream Server

[Enabled]/[Disabled] the Audio Stream Server. Then specify Port for audio Streaming, and

Quality (64, 96, 128, 192 or 256 kbps). The Audio Stream could be heard using suitable audio

player (Media Player, Winamp, etc.) or through the WEB interface by pressing the [Listen] button.

SNMP Agent

Agent

- [Enabled]/[Disabled] the SNMP Agent.

Specify Agent ID, Agent Port, Read/Write Communities, Manager IP, Manager Port and session

timeout. Agent ID is used for identification of the device among others, when an SNMP notification

is being sent.

Once all needed settings are applied, use the [Test] button to generate a test notification, which

upon success will be received by the SNMP Manager.

Press the [Download] button to download the latest available DB4402-V2 SNMP MIB file.

NOTE:

The MIB file may vary from one firmware revision to another. Downloading this file

from the device, guarantees that you have the proper MIB file.

E-mail

To use the email notification option, please make sure it is [Enabled] by pressing the relevant

button. Then follow the instructions below:

Enter the desired alarm recipients in e-mail 1 and/or e-mail 2 fields.

2. Fill in your e-mail account settings: Sender, Username and Password, Server, SNMP port

and connection type.

It is mandatory the type of connection with the server to be specified from Connection -

Regular, Encrypted.

4. The Server port will be changed accordingly. Please note that the most commonly used port

will be entered in the field. If the port that is to be used is different, change it manually to

the correct value.

5. We recommend you to use the [Test] button and generate a test e-mail, which upon success

will be delivered to the specified E-mail 1 and/or E-mail 2. Example of Test E-mail Message:

DB4402-V2 Test Message.

Please do not reply to this e-mail.

If you experience difficulties in the set-up, or would like to use DEVA account for sending of

alarm email notifications, press the [DEVA] button option, and:

1. Complete the recipient emails (E-mail 1 and E-mail 2) only.

The other fields must be left blank, otherwise the email notification option will not be

working.

3. We recommend you to use the [Test] button and generate a test e-mail, which upon success

will be delivered to the specified E-mail 1 and/or E-mail 2. Example of Test E-mail Message:

DB4402-V2 Test Message.

Please do not reply to this e-mail.

Even though using the DEVA account eases the set-up process, we recommend user account to

be used for sending of email notifications, and the DEVA account for test purposes. When using

DEVA account, please note that the stable 24/7 connection depends on the mail service provider

and cannot be guaranteed.

NOTE:

In order for the applied settings to be used press the [Save] button, placed on the

bottom right part of the screen.

Содержание DB4402-V2







































































Результаты поиска

Содержание DB4402-V2

Отзывы:

Похожие инструкции для DB4402-V2

Бренды по названию

Популярные бренды

DEVA Broadcast DB4402-V2, Инструкция по техническому обслуживанию и эксплуатации

Результаты поиска

Содержание DB4402-V2

Отзывы:

Похожие инструкции для DB4402-V2

Бренды по названию

Популярные бренды