DEVA Broadcast DB4402-V2 Скачать руководство пользователя страница 38

Страница: 38 / 70

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 38 -

Channel

•

[Enabled] / [Disabled] channel monitoring and sending of warnings and alarms. If the

channel is not generally enabled, the frequency will not be monitored and alarm notifications

will not be received;

•

Frequency – specify the frequency to be monitored;

•

Name – channel alias. The same name will appear on the quick access buttons in the

“dashboard”;

•

Acquisition time – specify the observation time for the current station (before switching to

the next channel).

• E-mail – set email address that will receive warning and alarm notifications for this service

only.

NOTE:

When MPX Power alarm is enabled the observation time must be more than 70 seconds.

NOTE:

In order to have correct Long-term loudness value logged in log file channel observation

time must be more than the Long-term loudness measurement sliding time window (see

“Loudness”

on page 25

Alarm

•

Alarm Range – interactive slider used to adjust the Low & High thresholds at which an

alarm will be generated;

•

Warning Range – interactive slider used to adjust the Low & High thresholds at which a

warning will be generated;

•

Threshold – buttons to enable/disable alarm range limits;

•

Trigger Time – waiting time before Active Alarm/Warning is generated;

•

Release Time – waiting time before Idle Alarm/Warning is generated;

•

RDS/RBDS Group Alarm – alarm only for selected groups will be generated.

IMPORTANT NOTE:

Warnings and alarms are generated only when the Logger mode is

running. While there is any user interaction, warning or alarm will not be generated and send. The

Logger starts running once the user logs out of the WEB interface.

Trigger and Release times define the time, which should elapse in order for the received signal

to be defined as low/high/lost or restored/OK. What we recommend is the release time to be bigger

than the trigger time.

NOTE:

When setting Trigger and Release times, have in mind that 01:00 means 1 minute, and

00:01 means 1 second.

NOTE:

In order for the applied settings to be used press the [Save] button, placed on the

bottom right part of the screen.

Содержание DB4402-V2







































































Результаты поиска

Содержание DB4402-V2

Отзывы:

Похожие инструкции для DB4402-V2

Бренды по названию

Популярные бренды

DEVA Broadcast DB4402-V2, Инструкция по техническому обслуживанию и эксплуатации

Результаты поиска

Содержание DB4402-V2

Отзывы:

Похожие инструкции для DB4402-V2

Бренды по названию

Популярные бренды