DEUTSCHMANN AUTOMATION UNIGATE CX-PROFINET 2Port - CANopen, Руководство пользователя

Страница: 38 / 58

Error handling Deutschmann Automation GmbH & Co. KG
38 Fieldbus-Gateway UNIGATE
®
CX C4Map - PROFINET V. 1.0 29.9.20
13.2 Error handling at UNIGATE
®
CL-PROFINET
If the Gateway detects an error, the error is signalled by the “State“ LED lighting red and, simulta-
neously, the error number being indicated by means of LEDs “Error No.“ as shown in the table
below. A distinction can be made between two error categories:
Serious errors (1-5): In this case, the Gateway must be switched off and switched back on again.
If the error occurs again, the Gateway must be exchanged and returned for repair.
Warnings (6-15): These warnings are displayed for one minute simply for information purposes
and are then automatically reset. If such warnings occur frequently, please inform After-Sales
Service.
For user-defined errors the flash frequency is 0.5 hertz. The error is displayed as long as defined
by "
Set Warning Time
".
In the configuration mode these displays are not valid and only meant for internal use.
LED8 LED4 LED2 LED1
Error no.
resp. ID
Error description
0 0 0 0 0 Reserved
0 0 0 1 1 Hardware fault
0 0 1 0 2 EEROM error
0 0 1 1 3 Internal memory error
0 1 0 0 4 Fieldbus hardware error or wrong Fieldbus-ID
0 1 0 1 5 Script error
0 1 1 0 6 Reserved
0 1 1 1 7 RS-transmit buffer overflow
1 0 0 0 8 RS-receive buffer overflow
1 0 0 1 9 RS timeout
1 0 1 0 10 General fieldbus error
1 0 1 1 11 Parity-or frame-check-error
1 1 0 0 12 Reserved
1 1 0 1 13 Fieldbus configuration error
1 1 1 0 14 Fieldbus data buffer overflow
1 1 1 1 15 Reserved
Tabelle 1:
Table 1: Error handling at UNIGATE
®
CL-PROFINET