DEUTSCHMANN AUTOMATION SPEEDY Series, Инструкция по эксплуатации

Страница: 12 / 22

SPEEDY switching modes Deutschmann Automation GmbH & Co. KG
12
Instruction manual dynamic switching accelerator SPEEDY V. 3.1 30.1.20
5 SPEEDY switching modes
5.1 Setting the switching modes
The switching modes described below are selected via a rotary coding switch.
The following assignment applies:
Rotary-switch indication Switching mode Input interference suppression
0 1 Switched off
1 2 Switched off
2 3 Switched off
3 4 Switched off
4 5 (1ms) Switched off
5 5 (2ms) Switched off
6 5 (5ms) Switched off
7 5 (10ms) Switched off
8 1 Active
9 2 Active
A 3 Active
B 4 Active
C 5 (1ms) Active
D 5 (2ms) Active
E 5 (5ms) Active
F 5 (10ms) Active
Please note that every change of the inputs is evaluated directly in the first 8 switch positions.
This mode is practical if the inputs are connected to the outputs of a control and SPEEDY is
required to provide an immediate response.
If interference suppression is activated, the input signals are filtered which leads to a delay (prop-
agation time input --> output) of approx. 1 ms.
This operating mode is practical if the inputs are switched by a relay or if the input lines are sub-
ject to very strong interference.