DEUTSCHMANN AUTOMATION LOCON 100, Инструкция по эксплуатации

Страница: 15 / 30

22.1.08 Instruction manual LOCON 100 / 200 and ROTARNOCK 80 / 100 with fieldbus connection V. 1.0 15
Deutschmann Automation GmbH & Co. KG Offset-table
6.13 Example: Parameter-table
Address in dez Description Length Value in dez
0 Offset_Type WORD 1
2 Offset_Length WORD 12
4 Offset_Address WORD 0
6 Cam_MT_Type WORD 3
8 Cam_MT_Length WORD 6
10 Cam_MT_Address WORD 12
12 Cam_MT_Cam (1).ProgNo WORD 0
14 Cam_MT_Cam (1).Output WORD 4
16 Cam_MT_Cam (1).On DWORD 20
18 Cam_MT_Cam (1).Off DWORD 40
In this example the output 4, Cam_MT_Cam(1).Output is set in the program 0,
Cam_MT_Cam(1).ProgNr., between position 20, Cam_MT_Cam(1).On and 40,
Cam_MT_Cam(1).Off. The value Cam_MT_Length is the amount of bytes and is calculated as
follows: Amount of cams multiplied by six.
Offset_Length is the amount of bytes of the offset parameters, always starting at zero and ending
at the address 10 in this example.
Explanation:
Type Length
BOOL 1 bit
BYTE 8 bits
WORD 2 bytes
DWORD 4 bytes