Blitz-DT9 User Manual
- 16 -
all controls are completely and correctly operational. You should be able to
walk approximately 30~50 paces from the model without losing control.
WARNING
: Never fly in range check mode (test mode).
Flight Mode
The flight mode function allows switching between various aircraft flight
characteristics (flight mode) using a switch. The flight modes which can be
selected are various with model type.
Airplane flight mode:
NORM
(normal) and
HOLD
(hold).
Helicopter flight mode:
NORM
(normal),
HOLD
(hold), and
ACR
(acrobatic).
It is possible to activate these flight modes by the throttle hold switch and
acrobatic flight switch:
You can change between normal and throttle hold flight mode by toggling
throttle hold switch. The switch can be customized, please refer to
Throttle
Hold [THR Hold]
(Page
34)
f
or airplane and
Throttle Hold [THR Hold] (Page
49) f
or helicopter.
You can change between normal and acrobatic flight mode by toggling
acrobatic flight switch. The switch can be customized, please refer to
Switch
Set [Switch Set] (Page 48) for helicopter
.
Firmware Update
You can put the firmware in the SD card and update the Blitz-DT9 by the SD
card.
NOTE
: Before installing the upgrading files, always export all models (refer
to
Page 25
) to an SD card separate from the SD card containing the update.
The update may erase all model files.
Precondition: Download the latest firmware into the root directory of the SD card.
Steps:
1. Press and hold the scroll wheel while turning on the transmitter, it will read the
update automatically and install the firmware into the transmitter.
2. When the update is completed, the interface will go to the calibration interface
automatically.
3. After completing the calibration, the interface will go to the initialization
interface automatically.