ACS
Series
13
Attach burner pan to the brass fitting attached to the Manifold Assembly using one (1) #8-32 x 3/8”
round head screw and flat washer from the hardware kit. The brooder is now assembled and ready for
installation.
17
Use the three (3) wire ties to hold the electrode ignition control cable in place on the manifold tube.
Space out wire ties evenly along manifold tube.
Figure 3.7
•
Final Brooder Assembly
16
Hanger
BP-179
Gas Valve
Burner Pan
BP-114
Control Box
BP-111
Reflector Canopy
BP-88
Emitter Cone
Assembly
BP-190
Manifold Assembly
BP-144A
Electrode Holder
BP-150
2.0
Safety
•
Brooder Assembly Instructions
