ACS
Series
12
Figure 3.5
•
Connecting the Gas Valve
15
Attach electrode bracket from the electrode assembly kit to the burner assembly using one (1) keps nut
from the hardware kit. Attach the electrode bracket using two (2) 1/4” sheet metal screws and one (1)
#10-24 keps nut from the hardware kit. Secure the high voltage wire to the electrode terminal (see Figure
3.6).
Figure 3.6
•
Electrode Assembly
Electrode Bracket
(secure to burner
using 1/4” sheet
metal screws)
Electrode Terminal
2.0
Safety
•
Brooder Assembly Instructions
Locate the wires from the control box and connect to the terminals of the gas valve as shown in Figure
3.5. Refer to the internal wiring diagram on pages 23-24.
14
15
15
1
2
3
4
Wire Connections
(Terminals 1 & 4)
14
Threaded Post
Grey
Yellow
#10-24 Keps Nut
15
